Sliding Arm Test: 1,000 cycles, 500 gr load, 400 Emery paper, 35.5 sq. cm surface
Tabor Abrasion: Cs 17 wheel, 1kg load, 1,000 cycles, weight loss in mg
Scratch Master: initial = first sign of substrate
Scratch Master: complete = total removal of film
Salt Spray Resistance: 5% NaCl at 35°C/95°F, hours to failure
Detergent Resistance: hours to failure
Dielectric Strength: 100 micrometers film
The values shown represent average experiences from numerous testing sources and are not intended to be specifications. These values will vary depending upon the individual compositions of the primers and topcoats and the systems used. For further information on the properties of these coating systems, and examples of how they have led to the development of new products, increased production rates, and resultant cost savings, consult DuPont or a Licensed Industrial Applicator.
Note: All technical advice, application suggestions, recommendations and services are rendered by the seller gratis. They are based on technical data which the Seller believes to be reliable and are intended for use by persons having skill and know-how, at their own discretion and risk. Seller assumes no responsibility for results obtained or damages incurred from their use by Buyer in wholer or in part. Such technical advice, application suggestions, recommendations or services are not to be taken as a license to operate under, or intended to suggest infringement of, any existing patent
* Statements regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.
